...
Headset: Jabra headset. It comes with a connector to a USB, but if unplug from the connector, it can be plugged in as a headphone jack
...
Monitor:
You will need a cable to connect to the docking station. Depending on the monitor that you have, this cable could vary.
The Surface laptop and docking stations both have a mini display port. Therefore, you need a cable that goes from your monitor to a mini-display port (the most common cable is the HDMI to mini display).
...
Once you connect all the equipment to the power outlet and the docking station, you can connect your PC to the docking station and start using the monitor, mouse, and headset.
Epitec Monitor Setup:
Open opening the box you should have these multiple components: the monitor screen, monitor arm, the docking station, the power cable and the mini display cable. Depending on the monitor that you have, the mini display cable end could vary (the most common cable is the HDMI to mini display)..
The monitor screen will easily click onto the monitor arm. Once it is put together, you can plug the HDMI (or other) cable and power cord into the back of the monitor.
...
The last step you will need to do is plug the mini display Then, you can plug the power cord into the outlet and the mini display cable into the docking station.
Once you connect all the equipment to the power outlet and the docking station, you can connect your PC to the docking station using the charging port, and you are good to go!
| Info |
|---|
Please note that it is normal for the laptop screen to flicker black a few times upon startup/plugging into the docking station. This is just all of the equipment trying to get acquainted with one another! |
To configure the additional screen on your laptop, please refer to Setup Screen/Monitor - Knowledge Base - Epitec Wiki (atlassian.net)
...