IT Standard Equipment Set up

Open

Equipment:

• Surface Laptop

• Headset

• Mouse

• Microsoft Surface Docking station

• Monitor

Surface Laptop:

Microsoft Surface Laptop 2

• 1 x full-size USB 3.0

• 3.5 mm headphone jack

• Mini DisplayPort

• 1 x Surface Connect port

Microsoft Surface Laptop 3

• 1 x USB-C™

• 1 x USB-A

• 3.5 mm headphone jack

• 1 x Surface Connect port
  
  

Microsoft Docking Station

Open

• 2x Mini display ports

• 1x Gigabit Ethernet port

• 4 USB 3.0 ports

• 1x audio out port
  
  

Mouse: Comes with a USB connector (inside, where the batteries are) that must be connected in order to work.

Headset: Jabra headset. It comes with a connector to a USB, but if unplug from the connector, it can be plugged in as a headphone jack

Epitec Monitor Setup:

Open opening the box you should have these multiple components: the monitor screen, monitor arm, the docking station, the power cable and the mini display cable. Depending on the monitor that you have, the mini display cable end could vary (the most common cable is the HDMI to mini display)..

The monitor screen will easily click onto the monitor arm. Once it is put together, you can plug the HDMI (or other) cable and power cord into the back of the monitor.

Then, you can plug the power cord into the outlet and the mini display cable into the docking station.

Once you connect all the equipment to the power outlet and the docking station, you can connect your PC to the docking station using the charging port, and you are good to go!

To configure the additional screen on your laptop, please refer to Setup Screen/Monitor - Knowledge Base - Epitec Wiki (atlassian.net)